When being received the signal for the first time
with the IC-756PRO, the digital IF filter " it is cut off and " it thinks that
which is surprised.
As for this in the IC-756PRO the DSP of loading, with the former analog filter cannot be
actualized the ideal 㦣130;磦#130;磦#131;죦#131;—㦣131;•㦣130;ᠷhich
Because the 㦣130;#130;#131;젩s actualized, is. In addition, the filter " it
is cut off, " for the preeminence contiguity outside filter setting zone
The signal the 㦣131;㦣131;ƒ㦣130;壦#131;꠩s cut down, but it is cut off too much,
but in reason, in especially CW mode whether in the filter edge the?㦣129;㠼br>It is
concerning the signal, the former analog machine method of being audible which is
different rather is done. Concrete, as for the CW signal outside filter setting zone,
when the former analog IF filter is made to pass, beat
Because frequency has gone in the skirt of the filter, it is audible as a CW reception
sound, but digital IF filling
When the tar is made to pass, because beat frequency is outside filter zone, with the
transmission of the CW, wide the 㦣129;㠼br>Is the component (just key click and the
like) becomes a state where it is audible. This, until recently the analog IF filter of
the machine
It is point of difference of the digital IF filter of the IC-756PRO.
When you rephrase, with the former analog IF filter it comes to the grade of radio wave
which is not visible being visible, with the notion that where,
The radio wave which spread and the radio wave et cetera whose in addition key click is
many, it could separate with the machine until recently with the skirt of the filter
The component, with the IC-756PRO becomes the way which is audible. In addition, with the
IC-756PRO, until recently from filter setting width with the machine
Perhaps to use you can feel the method of setting some spreading, easily.
(Example: Until recently machine with 500Hz in case of errand, with IC-756PRO 600Hz and
the like)
|
