BKTLocalize (c)IZ2BKT Capelli Mauro
HELP=IC7000BKT.HLP
"- 100Hz"=
"- 100KHz"=
"- 100MHz"=
"- 10Hz"=
"- 10KHz"=
"- 10MHz"=
"- 1Hz"=
"- 1KHz"=
"- 1MHz"=
"- or to -"=
"-"=
"%"=
"%1 contained an unexpected object."=
"%1 contains an incorrect schema."=
"%1 contains an invalid path."=
"%1 could not be created because the directory is full."=
"%1 could not be opened because there are too many open files."=
"%1 could not be removed because it is the current directory."=
"%1 has a bad format."=
"%1 KHz :  Not valid value for duplex function"=
"%1 was not found."=
"%1: %2\nContinue running script?"=
"%1\nCannot find this file.\nPlease verify that the correct path and file name are given."=
"%1\nUnable to register document.\nThe document may already be open."=
"%s          ---        List transceiver Memories"=
"%s          ---        Memory Bank %s"=
"%s is not a valid path"=
"&Hide"=
"(c)"=
"..."=
"\nIn %d seconds the sked:\n<%s>\nwill be activated.\n\nPress Abort to cancel."=
"^Tx"=
"+ 100Hz"=
"+ 100KHz"=
"+ 100MHz"=
"+ 10Hz"=
"+ 10KHz"=
"+ 10MHz"=
"+ 1Hz"=
"+ 1KHz"=
"+ 1MHz"=
"+"=
"0"=
"1"=
"10 mt 28MHz"=
"12 mt 24MHz"=
"15 mt 21MHz"=
"160 mt 1.8MHz"=
"17 mt 18MHz"=
"2 mt 144MHz"=
"2"=
"20 mt 14MHz"=
"3"=
"30 mt 10MHz"=
"40 mt 7MHz"=
"6 mt 50MHz"=
"70 cm 430MHz"=
"80 mt 3.5MHz"=
"A hardware I/O error was reported while accessing %1."=
"A locking violation occurred while accessing %1."=
"A memory with this description already exist, Replace ?"=
"A required resource was unavailable."=
"A sharing violation occurred while accessing %1."=
"A sked with this date and time already exists, replace ?"=
"A sked with this description already exists, replace ?"=
"A split with these values already exist, Replace ?"=
"A"=
"A=B"=
"Abort operation"=
"Abort reading the memories?"=
"Abort the print in progress ?"=
"Abort the writing of memories ?"=
"Abort"=
"About IC7000BKT..."=
"Access to %1 was denied."=
"Action to be performed if the memory exists both in the database and in the RTX"=
"Activate the Split with the indicated values"=
"Activate"=
"Activate/deactivate clipboard interception"=
"Activate/Deactivate the split"=
"Activates automatic mode based on the frequency from the clipboard"=
"Activates the frequency of the selected line"=
"Active this band"=
"Active"=
"Add a description of the split"=
"Add a description to the highlighted memory"=
"Add a description to the selected sked"=
"AF"=
"AGC"=
"ALC"=
"Alc"=
"All Files (*.*)"=
"Allows cancellation of skeds by date and time"=
"Also cancel the memory in the RTX?"=
"An attempt was made to access %1 past its end."=
"An attempt was made to read from the writing %1."=
"An attempt was made to write to the reading %1."=
"An invalid argument was encountered."=
"An invalid file handle was associated with %1."=
"An unexpected error occurred while reading %1."=
"An unexpected error occurred while writing %1."=
"An unknown error has occurred."=
"An unknown error occurred while accessing %1."=
"an unnamed file"=
"An unsupported operation was attempted."=
"ANF"=
"Announce Frequency, S-Meter level and Receive Mode"=
"Anti VOX Level\n-----------------\nRight Click for manual input"=
"AntiVox"=
"Att"=
"ATTENTION !!!\nCancel all memories of the transceiver ?"=
"ATTENTION !!!\nProceeding the actual files and CONFIGURATION will be overwrited.\nContinue?"=
"ATTENTION !!!\nProceeding will cancel all 99 memories of the transceiver.\n\nCONTINUE ?"=
"ATTENTION !!!\nRestore the default settings of the program ?"=
"ATTENTION, during the reading of memories the RTX will transmit, double check that the antenne are connected!\n\nRead the memories from %d to %d using the PTT?"=
"ATTENTION: Delete the memory %1 ?"=
"ATTENTION: Overwrite memory %s ?"=
"ATTENTION: this is a beta version.\nThe beta version is a special version to test the program and could be it doesn't complete, unstable and not optimized.\n\nTo signal problems or other, please, to fill the form on\nhttp://iz2bkt.altervista.org/ic7000bktbeta.htm\ntanks.\n\nTHIS BETA WILL STOP TO WORK AFTER MONTH: %d - YEAR: %d.\n\n73 de IZ2BKT Mauro."=
"Audio compression is setting from external driver"=
"Audio File"=
"Audio format (click over to change)"=
"Audio format (click to change)"=
"Audio Format"=
"Audio output level\n-----------------\nRight Click for manual input"=
"Audio support disabled"=
"Audio support settings, click to change"=
"Auto CQ"=
"Auto power off time"=
"Auto Power OFF"=
"Automatic setting of mode"=
"Autoupdate in seconds"=
"Autoupdate"=
"B"=
"Background color"=
"Background"=
"Backup archives and configuration performed."=
"Backup file not valid or damaged"=
"Backup the archives and configuration"=
"Backup"=
"Band %1mt"=
"Band :"=
"Band Limits :"=
"Band Limits"=
"Band Stacking :"=
"Band Stacking"=
"Band"=
"Bands 1"=
"Bands 2"=
"Bands 3"=
"Bands"=
"Bank A"=
"Bank B"=
"Bank C"=
"Bank D"=
"Bank E"=
"Bank"=
"BAUD :"=
"Begin scanning"=
"Bit :"=
"Bit of Stop :"=
"BW"=
"C"=
"Call : %1"=
"Call setup function for the driver selected"=
"Cancel all RTX memories"=
"Cancel all skeds programmed from %s to %s?"=
"Cancel the activation of the sked <%s> ?"=
"Cancel the operation?"=
"Cancel the selected memory"=
"Cancel the selected split"=
"Cancel"=
"Change current language"=
"Change the audio parameters ?"=
"Change the band"=
"Character for the decimal ones"=
"Check for new version, need active internet connection."=
"Check for update"=
"Check On"=
"Check"=
"Choose the VFO in Use"=
"CI-V Address :"=
"Click here and get the code FREE"=
"Clipboard multiplication factor to obtain the correct frequency on TRX"=
"Clipboard"=
"Clock 1 date"=
"Clock 1 time"=
"Clock 2 status"=
"Clock 2 time offset from clock 1"=
"Clock"=
"Close the window loosing the changes?"=
"Close this window"=
"Close"=
"Colors sample"=
"Colors"=
"COM"=
"Command failed."=
"Command for switch PTT OFF"=
"Command for switch PTT ON"=
"Command line for the program"=
"Command Line"=
"Communication with the Clipboard"=
"Comp"=
"Compression Level\n-----------------\nRight Click for manual input"=
"Config."=
"Configuration not valid."=
"Configuration not valid.\n\nSet now ?"=
"Configuration"=
"Configure band and mode limits"=
"Configure Plug-In"=
"Confirm the selected memory"=
"Continue"=
"Control integrity program error. Try to download the program from %1 and re-install."=
"Copy in StartUp"=
"Copy the selected memory in the memory clipboard"=
"Copy the selected PlugIn in StartUp group"=
"Copy"=
"Could not start print job."=
"Create recur sked"=
"Create the new skeds ?"=
"Create the new skeds"=
"Creates a recurrence of skeds with the actual values"=
"Cut the selected memory in the memory clipboard"=
"Cut"=
"CW"=
"D"=
"Data of activation :"=
"Date and Time UTC"=
"Date not valid."=
"Date UTC of activation sked"=
"Day"=
"Days :"=
"Days interval not valid."=
"days up to"=
"Default = 70"=
"Default"=
"Delay in milliseconds before sending a bad command"=
"Delay"=
"Delete <%s> from startup program group ?"=
"Delete <%s> Plug-In ?"=
"Delete all log ?"=
"Delete all log"=
"Delete All"=
"Delete old skeds on program startup"=
"Delete old skeds on startup"=
"Delete programmed skeds from"=
"Delete programmed skeds to"=
"Delete skeds"=
"Delete the selected line ?"=
"Delete the selected line"=
"Delete the selected memory"=
"Delete the selected memory?"=
"Delete the selected program from the startup group"=
"Delete the selected sked"=
"Delete the selected sked?"=
"Delete the selected Split?"=
"Delete"=
"Descr."=
"Description of Plug-In (visualized on the ToolTip of the PlugIn)"=
"Description of the program"=
"Description of the selected memory"=
"Description of the split"=
"Description that identifies the selected sked"=
"Description"=
"Destination disk drive is full."=
"discard changes?"=
"Disk full while accessing %1."=
"Dispatch exception: %1"=
"Divisor to calculate the values S1-S9+90"=
"Divisor"=
"Download now ?"=
"Driver Setup"=
"DSP filter shape"=
"DTCS codes"=
"Dtcs"=
"DTCS"=
"DTR :"=
"DTR ON/OFF"=
"DUP -"=
"DUP +"=
"DUP Value :"=
"E"=
"E-Mail : %1"=
"email"=
"Enable audio support"=
"Enable the additional commands"=
"Enable/disable the audio recording"=
"Enable/disable the audio support"=
"Enable/Disable the auto-update"=
"Enable/Disable the log of SQL recording events"=
"Enable/disable the memories window"=
"Enable/disable the radio memories wndow"=
"Enabled"=
"End frequency :"=
"End memory :"=
"End scan frequency"=
"End scanning"=
"English"=
"Error %d from audio device"=
"Error %s, the PlugIn %s has not been saved"=
"Error %s\nThe changes won't be saved"=
"Error in external driver, the program will be closed."=
"Error in external driver.\n\nSet now ?"=
"Error in opening the log file"=
"Error in the initialization of the audio support."=
"Error performing backup : %1"=
"Error performing restore : %1"=
"Example"=
"Exit from the Log"=
"Exit from the program."=
"Exit the program"=
"Exit without saving"=
"Exit"=
"External Driver"=
"Failed to create empty document."=
"Failed to launch help."=
"Failed to open document."=
"Failed to save document."=
"FAST"=
"File :"=
"Fill form on the web and receive by e-mail the key for free version and trial 30 days full version."=
"Filter"=
"Filter:"=
"FilterW"=
"Find the Plug-In or program"=
"Find the program"=
"FM"=
"Folder < %1 > cannot be created."=
"Folder < %1 > does not exist, create ?"=
"Folder < %1 > doesn't contains any files of backup."=
"Folder < %1 > not valid."=
"Folder for audio files not valid"=
"Folder for audio files"=
"Folder to save the audio files"=
"Following memory"=
"For enable the new configuration, the program will automatically be close, please restart."=
"Freq./Mem."=
"Frequency Mode"=
"Frequency of duplex ( 0 for default )"=
"Frequency of duplex"=
"Frequency of the Manual Notch Filter 1\n-----------------\nRight Click for manual input"=
"Frequency of the Manual Notch Filter 2\n-----------------\nRight Click for manual input"=
"Frequency offset in Hz"=
"Frequency"=
"Friday"=
"from %1 Hz to %2 Hz"=
"From"=
"Full path of the Plug-In command line"=
"Full Version trial time has expired and now continue with the Free Version.\n\nIf you like this program, please, support its development and register the Full Version\n\nDo you want information on the Full Version ?"=
"General coverage of RTX"=
"General coverage of the transceiver from %1 Hz to %2 Hz"=
"Generate"=
"H"=
"Help"=
"Hexadecimal address to identify the RTX"=
"High limit Hz"=
"Hook Clipboard"=
"http://iz2bkt.altervista.org/ic7000bkten_download.html"=
"Hz"=
"I have the key, load it"=
"I. S."=
"IC7000"=
"IC7000BKT - ATTENTION"=
"IC7000BKT - Audio setting"=
"IC7000BKT - AudioRecorder"=
"IC7000BKT - Band and mode limits"=
"IC7000BKT - Configuration"=
"IC7000BKT - Delete Skeds"=
"IC7000BKT - ERROR"=
"IC7000BKT - Generate recur sked"=
"IC7000BKT - Memories Synchronization"=
"IC7000BKT - Memory Bank"=
"IC7000BKT - Plug-In"=
"IC7000BKT - PTT Setup"=
"IC7000BKT - PTT"=
"IC7000BKT - Register as free"=
"IC7000BKT - Registration"=
"IC7000BKT - ScanLog"=
"IC7000BKT - Select DTCS code"=
"IC7000BKT - Select Language"=
"IC7000BKT - Select Tone"=
"IC7000BKT - setting COM"=
"IC7000BKT - Startup"=
"IC7000BKT - Store current setting"=
"IC7000BKT - Warning"=
"IC7000BKT Cat Control for Icom IC-7000"=
"IC7000BKT has been registered succesfully."=
"IC7000BKT"=
"IC7000MKII"=
"IC7000MKII/G"=
"IC718"=
"IF filter selection"=
"If memory exist on RTX and on database execute:"=
"Impossible to save the memories : %1"=
"Impossible to save the scan log"=
"Impossible to save the skeds : %1"=
"Impossible to save the split : %1"=
"Info"=
"Input the value and press Enter.\nPress Esc to abort."=
"Insert a description and press Update"=
"Insert a description, choose a memory and press Save"=
"Insert e-mail address"=
"Insert own call."=
"Insert own name."=
"Insert the description and press Save"=
"Insert your call or your name in the appropriate field."=
"Inside PBT setting"=
"Insufficient memory to perform operation."=
"Internal application error."=
"Invalid filename."=
"Its not possible to check updatings at this time."=
"Keep in front key PTT"=
"Keep recorder in front"=
"Keep the recorder in front"=
"Key for PTT :"=
"Key pressed sample"=
"Key PTT keep in front"=
"KHz"=
"Least valid signal"=
"LEV."=
"Limit down ( S0 )"=
"Limit of higher frequency for CW mode in the selected band"=
"Limit of higher frequency for FM mode in the selected band"=
"Limit of higher frequency for LSB mode in the selected band"=
"Limit of higher frequency for RTTY mode in the selected band"=
"Limit of higher frequency for the selected band"=
"Limit of higher frequency for USB mode in the selected band"=
"Limit of higher frequency on the RTX"=
"Limit of lower frequency for CW mode in the selected band"=
"Limit of lower frequency for FM mode in the selected band"=
"Limit of lower frequency for LSB mode in the selected band"=
"Limit of lower frequency for RTTY mode in the selected band"=
"Limit of lower frequency for the selected band"=
"Limit of lower frequency for USB mode in the selected band"=
"Limit of lower frequency on the RTX"=
"Limits"=
"Linked %s"=
"List memories"=
"List memorised skeds"=
"List of memorised splits"=
"List of the program in the startup group"=
"List of the Skeds :"=
"List radio memories"=
"List Skeds"=
"List Split"=
"List the Split :"=
"Local Time and Date"=
"Local"=
"Location and executable program"=
"Log :"=
"Log"=
"Loop pause"=
"Loop the phrase"=
"Loop"=
"Low limit Hz"=
"lower value equivalent to S0"=
"LSB"=
"m/s"=
"Mail system DLL is invalid."=
"Management of radio bands limits and modes"=
"Mem."=
"Memories"=
"Memory :"=
"Memory bank :"=
"Memory bank description"=
"Memory bank"=
"Memory Mode"=
"Memory name"=
"Memory number to begin reading from (from 1 to 99)"=
"Memory"=
"Mic. Gain"=
"Microphone Gain Setting\n-----------------\nRight Click for manual input"=
"MID"=
"Min.Sig.:"=
"Mixed"=
"MNF1"=
"MNF2"=
"Mode CW   from %1 Hz to %2 Hz"=
"Mode FM   from %1 Hz to %2 Hz"=
"Mode LSB  from %1 Hz to %2 Hz"=
"Mode RTTY from %1 Hz to %2 Hz"=
"Mode to use for tuning"=
"Mode USB  from %1 Hz to %2 Hz"=
"Mode"=
"MODO1"=
"MODO10"=
"MODO2"=
"MODO3"=
"MODO4"=
"MODO5"=
"MODO6"=
"MODO7"=
"MODO8"=
"MODO9"=
"Monday"=
"Monitor Level\n-----------------\nRight Click for manual input"=
"Monitor"=
"Month"=
"More information on the activation."=
"Multiplication Factor  :"=
"Name : %1"=
"Name of audio file (AUTO for automatic)"=
"Name of Plug-In (visualized on the key of the PlugIn)"=
"Name of the audio file to be used for the recordings (Auto for automatic choice)"=
"Name of the log file"=
"Name"=
"NB level setting\n-----------------\nRight Click for manual input"=
"NB width setting\n-----------------\nRight Click for manual input"=
"NB"=
"New version avaible : %s"=
"New"=
"nn = pause in miilisecondi with the opened SQL\n 0 = pause while SQL open\n-1 =  use resume of the IC 7000 and ignore Pause 2"=
"No error message is available."=
"No error occurred."=
"Not all of the system registry entries (or INI file) were removed."=
"Not valid communication address"=
"Nothing"=
"Now disable this function : %s. \n\nThis function it's avaible only in full version.\n\nFor more information, use the menù Utility and choose <Register full version>."=
"Nr > Description"=
"NR level setting (Default=6)\n-----------------\nRight Click for manual input"=
"NR"=
"Nr"=
"Number of data bits"=
"Number of stop bits"=
"Number of the last memory to read (from 1 to 99)"=
"O.S."=
"OFF"=
"Offset from UTC time\nAUTO = uses the system settings"=
"Offset"=
"Ok"=
"OK"=
"ON/OFF Attenuator 20db"=
"ON/OFF Auto Notch Filter"=
"ON/OFF Break In"=
"ON/OFF DTCS codes in RX mode"=
"ON/OFF DTCS codes in TX mode"=
"ON/OFF DTCS codes"=
"ON/OFF Duplex ( TX down )"=
"ON/OFF Duplex ( TX up )"=
"ON/OFF Manual Notch Filter 1"=
"ON/OFF Manual Notch Filter 2"=
"ON/OFF Monitor your transmitted signals"=
"ON/OFF Noise Blanker"=
"ON/OFF Noise Reduction"=
"ON/OFF Preamplifier"=
"ON/OFF Speech Compressor"=
"ON/OFF Tone in RX mode"=
"ON/OFF Tone in TX mode"=
"ON/OFF Tone Squelch in RX mode"=
"ON/OFF Tone Squelch in TX mode"=
"ON/OFF Tone Squelch"=
"ON/OFF Tone"=
"ON/OFF Twin Peak Filter for RTTY mode"=
"ON/OFF Voice Squelch Control"=
"ON/OFF VOX"=
"Only selcted"=
"Open"=
"Open/close the memory bank"=
"OTHER"=
"Out of memory."=
"Outside PBT setting"=
"Overwrite Database"=
"Overwrite RTX"=
"packet"=
"Page %d of %d"=
"Parity :"=
"Parity value of the serial port"=
"Partial transmission time"=
"Partial"=
"Passband width"=
"Paste the data of the memory clipboard in the selected memory"=
"Paste"=
"Pause 1"=
"Pause 2"=
"Pause in milliseconds before resuming scan"=
"Pause in seconds between each recording sample"=
"Phrase %d not present, please register"=
"Phrase 1"=
"Phrase 2"=
"Phrase 3"=
"Phrase 4"=
"pixels"=
"Play all recorded audio"=
"Play All"=
"Play the phrase"=
"Play the recorded audio from the selected line"=
"Play"=
"Please enter a currency."=
"Please enter a date and/or time."=
"Please enter a date."=
"Please enter a GUID."=
"Please enter a number between %1 and %2."=
"Please enter a number."=
"Please enter a positive integer."=
"Please enter a time."=
"Please enter an integer between %1 and %2."=
"Please enter an integer between 0 and 255."=
"Please enter an integer."=
"Please enter no more than %1 characters."=
"Please register this program its free."=
"Please select a button."=
"PlugIn <%s>  has correctly been inserted in the startup program"=
"Plug-In"=
"PlugIn/Program"=
"PO"=
"Pow."=
"Power Out\n-----------------\nRight Click for manual input"=
"Power to use for tuning"=
"Power"=
"Pre"=
"Pressed key color"=
"Previous memory"=
"Print the band limit settings?"=
"Print the list of memories?"=
"Print the list of the memories"=
"Print the list of transceiver memories?"=
"Print the Log"=
"Print the Skeds ?"=
"Print the Split?"=
"Print"=
"Prints"=
"Proceed"=
"prog"=
"Program"=
"Protocol of communication: NONE=No handshaking, HARD=Hardware, SOFT=Software"=
"PTT -> Tune mode:%s Power:%d%%"=
"PTT disabled"=
"PTT Key : %s"=
"PTT OFF"=
"PTT ON"=
"PTT setting, click to change"=
"Put the RTX in Memory mode"=
"Radio Station : %1\nOperator : %2"=
"Read and download the RTX memories from %d to %d ?"=
"Read and download the RTX memories"=
"Read the memories from %d to %d and setting the DUP to %s ?"=
"Recall frequency and operating mode."=
"Recall"=
"Recall/Save First band stacking"=
"Recall/Save Second band stacking"=
"Recall/Save Third band stacking"=
"Record only if SQL OFF"=
"Record only if the squelch is open (only G Extensions)"=
"Record the phrase %d ?"=
"Record"=
"Records the phrase"=
"reg_en.html"=
"Register the program IC7000BKT"=
"Register the program"=
"Remove the selected PlugIn or Program from list"=
"Repeat this sked each"=
"Repeater Tone"=
"Replace <%s> PlugIn with the introduced data"=
"Request full version activation from the Web site"=
"Request full version code for %1."=
"Require the key"=
"Reset all fields to enter a new split"=
"Reset all fields to enter data for a new memory"=
"Reset partial transmission time ?"=
"Reset the fields to allow entry of data for a new sked"=
"Reset total trasmission time ?"=
"Reset trasmission time"=
"Reset"=
"Restore archives and configuration performed.\n\nFor enable archive and configuration restored, the program will automatically be close, please restart."=
"Restore default frequency for the Manual Notch Filter 1 and 2"=
"Restore default"=
"Restore the archives and CONFIGURATION"=
"Restore the default settings"=
"Restore the default value for NB"=
"Restore the saved settings"=
"Restore"=
"Resume"=
"RTS :"=
"RTS ON/OFF"=
"RTTY"=
"Rx Ac.T."=
"Rx DTCS"=
"Rx Dtcs"=
"Rx filter"=
"Rx Filter"=
"Rx Freq."=
"Rx Frequency out of limits : %dHz - %dHz"=
"Rx frequency"=
"Rx Mode"=
"Rx operating mode"=
"Rx Polarity"=
"Rx Tone"=
"Rx TSQL"=
"Rx TSql"=
"RX"=
"S"=
"s"=
"Saturday"=
"Save and Active"=
"Save and close this windows"=
"Save As"=
"Save changes to %1?"=
"Save current memory in the RTX and active Memory Mode"=
"Save frequency and operating mode."=
"Save the actual settings"=
"Save the current settings in an memory"=
"Save the current settings"=
"Save the current split"=
"Save the data in the startup group"=
"Save the memory with selected values"=
"Save the settings"=
"Save the sked with the current settings"=
"Save these settings?"=
"Save"=
"Saves the changes to the Plug-in selected"=
"Scan end out of limits : %dHz - %dHz"=
"Scan start out of limits : %dHz - %dHz"=
"Scan the radio memories"=
"Scanner management"=
"Scanner"=
"Scanning memories"=
"Scanning only selected memory"=
"Scanning resume"=
"Scanning Speed"=
"Scanning step"=
"Scanning"=
"Seconds"=
"Seek failed on %1"=
"Sel."=
"Select AGC mode"=
"Select audio format"=
"Select language"=
"Select Memory Bank"=
"Select memory for memory scan"=
"Select Memory"=
"Select Mode and Power set in configuration and put TX ON"=
"Select one or more printjobs"=
"Select operating mode"=
"Select the defult value for the selected filter"=
"Select the folder for the audio files"=
"Select the folder/file from which to recover the files"=
"Select the folder/file in which to save"=
"Select the Key file"=
"Select the key for PTT"=
"Select the RTX"=
"Select VFO A"=
"Select VFO B"=
"Selected"=
"Send an e-mail to iz2bkt@altervista.org"=
"Send Mail failed to send message."=
"Serial port COM%1 not working."=
"Serial port error.\n\nExit the program ?"=
"Serial port settings, click to change"=
"Serial port to use"=
"Serial Port/Driver :"=
"Set both VFOs to the current settings"=
"Set Callsign"=
"Set Mode"=
"Set primary VFO"=
"set the decimal character passed from the clipboard"=
"Set the RTX frequency"=
"Setting duplex value"=
"Setting S-Meter"=
"Setting the parameters of work"=
"Setting the program startup"=
"Setup"=
"Shape"=
"Short break too low"=
"SIG"=
"Signal"=
"Sked"=
"Skeds"=
"SLOW"=
"Specify how many seconds between the program and RTX syncronising"=
"Speech"=
"Speed of serial port"=
"Speed"=
"Split value not set"=
"Split"=
"SQL Value\n-----------------\nRight Click for manual input"=
"SQL"=
"Start frequency :"=
"Start memory :"=
"Start reading the specified memories"=
"Start scan frequency"=
"Start the selected prints"=
"Start the synchronization"=
"Start"=
"Start/Stop playback of the selected audio file"=
"Start/Stop the recording in a new audio file"=
"Startup"=
"Static"=
"Statico"=
"Station callsign"=
"Step too low"=
"Step"=
"Stop All"=
"Stop the play"=
"Stop the recording"=
"Stop"=
"Store in the RTX the call sign\nused for free or full registration (Radio Station)."=
"Store the current settings in an memory"=
"Store"=
"Sunday"=
"Switch scan from memory <-> frequency"=
"SWR"=
"Swr"=
"Syncronise the program with the RTX"=
"Syncronize the log with the file wav in ScanLog directory"=
"Syncronize the memories database with the RTX"=
"Syncronize the RTX clock with the current date and time"=
"Syncronize the RTX memories with those of the program?\n\nThe deleted RTX memories will also be deleted in the program, the name Mem<nn> where nn is the number of the memory will be assigned to the new RTX memories."=
"Syncronize Wav"=
"Syncronize with the PC clock"=
"Syncronize"=
"Syncronizes the program with the RTX memories"=
"System registry entries have been removed and the INI file (if any) was deleted."=
"t"=
"Temporarily interrupts the reproduction/recording in progress"=
"Text color"=
"Text"=
"The end scan must be higher than the start scan"=
"The execution of the program continues trying to reestablish the connection."=
"The file is not supported by a Document Object server."=
"The file is too large to open."=
"The frequency Rx and Tx are out of limits : %dHz - %dHz"=
"The modality OFF-LINE allows to use the program without the RTX.\nIf make changes the archives, syncronize the program with the RTX as soon as possible.\n\n Continue ?"=
"The new value is not valid"=
"The serial port COM:%1 does not work."=
"This beta version has expired, please download new version from %s"=
"This function is available only in Full Version.\n\nClick on Continue, if use Trial Version the function will be execute."=
"This function it's avaible only in full version.\n\nFor more information, use the menù Utility and choose <Register full version>."=
"This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s."=
"This program requires the file %s, which was not found on this system."=
"Thursday"=
"Time and Date UTC"=
"Time in second for the tune"=
"Time UTC"=
"Time"=
"Timeout"=
"To"=
"Tone Squelch"=
"Tone to the memory."=
"Tone"=
"Total transmission time"=
"Total"=
"TPF"=
"Transfer to VFO"=
"Transfers the memory to the VFO and switch in VFO mode"=
"Transmit <-> Receive"=
"Transmit"=
"TSql"=
"TSQL"=
"Tuesday"=
"Tune software emulation"=
"Tune"=
"Tuning Scale\n------------------\nRight Click for manual input"=
"Tx Ac.T."=
"Tx DTCS"=
"Tx Dtcs"=
"Tx filter"=
"Tx Filter"=
"Tx Freq."=
"Tx Frequency out of limits : %dHz - %dHz"=
"Tx frequency"=
"Tx Mode"=
"Tx Operating mode"=
"Tx Polarity"=
"Tx Time"=
"Tx Tone"=
"Tx TSQL"=
"Tx TSql"=
"TX"=
"Unable to load mail system support."=
"Unable to read from %1, it is opened by someone else."=
"Unable to read write-only property."=
"Unable to write read-only property."=
"Unable to write to %1, it is read-only or opened by someone else."=
"Uncheck"=
"Unexpected file format."=
"Unknown Type"=
"Untitled"=
"Update the description of the selected memory"=
"Updating in milliseconds"=
"Usable memories from 1 to 99."=
"USB"=
"Use memory E99  for internal temporary use"=
"Use the memory E99\nfor temporary data"=
"Use the PTT to calculate the value of the DUP"=
"UTC Offset :"=
"UTC Time and Date"=
"UTC time of sked activation"=
"UTC"=
"Utility"=
"Valid value from %1 to %2"=
"ValIfShift"=
"ValNBLev."=
"ValNBW."=
"ValNRLev."=
"ValOutShift"=
"Value of signal meter refresh in milliseconds"=
"Value of the first read memory is not valid.\n\nInsert a value from 1 to 99 and lower than the value of the last read memory"=
"Value of the last read memory not valid.\n\nInsert a value from 1 to 99."=
"VFO A"=
"VFO Active"=
"VFO B"=
"VFO Sel."=
"VFO-A : Hz"=
"VFO-B : Hz"=
"View Log"=
"View the SQL log events"=
"View user manual"=
"Visualize the bands of the 10mt - 6mt - 2mt and 70cm"=
"Visualize the bands of the 160mt - 80mt - 40mt and 30mt"=
"Visualize the bands of the 20mt - 17mt - 15mt and 12mt"=
"Volume Level for speech function\n-----------------\nRight Click for manual input"=
"VOX delay time\n-----------------\nRight Click for manual input"=
"VOX Level\n-----------------\nRight Click for manual input"=
"Vox"=
"VSC"=
"Wait for scanning resumption after the SQL closes"=
"web"=
"Wednesday"=
"When you have received the key, click here to load it and register the program"=
"WID."=
"Work in progress ..."=
"Work off line"=
"Writes the memories with a description starting Mem.<nn> to the RTX starting from <nn>?\n\nATTENTION: the RTX memories from <nn> will be overwritten."=
"Writes the memories with a description starting Mem.<nn> to the RTX."=
"Year"=
"You running last version"=