BKTLocalize (c)IZ2BKT Capelli Mauro
HELP=IC7000BKT.HLP
"- 100Hz"=
"- 100KHz"=
"- 100MHz"=
"- 10Hz"=
"- 10KHz"=
"- 10MHz"=
"- 1Hz"=
"- 1KHz"=
"- 1MHz"=
"- or to -"=
"-"=
"%"=
"%1 contained an unexpected object."=
"%1 contains an incorrect schema."=
"%1 contains an invalid path."=
"%1 could not be created because the directory is full."=
"%1 could not be opened because there are too many open files."=
"%1 could not be removed because it is the current directory."=
"%1 has a bad format."=
"%1 KHz :  Not valid value for duplex function"=
"%1 was not found."=
"%1: %2\nContinue running script?"=
"%1\nCannot find this file.\nPlease verify that the correct path and file name are given."=
"%1\nUnable to register document.\nThe document may already be open."=
"%d executions before the activation"=
"%s          ---        List program Memories"=
"%s          ---        List transceiver Memories"=
"%s is not a valid path"=
"&Hide"=
"(c)"=
"..."=
"\nIn %d seconds the sked:\n<%s>\nwill be activated.\n\nPress Abort to cancel."=
"^Tx"=
"+ 100Hz"=
"+ 100KHz"=
"+ 100MHz"=
"+ 10Hz"=
"+ 10KHz"=
"+ 10MHz"=
"+ 1Hz"=
"+ 1KHz"=
"+ 1MHz"=
"+"=
"0"=
"1"=
"10 mt 28MHz"=
"12 mt 24MHz"=
"15 mt 21MHz"=
"160 mt 1.8MHz"=
"17 mt 18MHz"=
"2 mt 144MHz"=
"2"=
"20 mt 14MHz"=
"3"=
"30 mt 10MHz"=
"40 mt 7MHz"=
"6 mt 50MHz"=
"70 cm 430MHz"=
"80 mt 3.5MHz"=
"A hardware I/O error was reported while accessing %1."=
"A locking violation occurred while accessing %1."=
"A memory with this description already exist, Replace ?"=
"A required resource was unavailable."=
"A sharing violation occurred while accessing %1."=
"A sked with this date and time already exists, replace ?"=
"A sked with this description already exists, replace ?"=
"A split with these values already exist, Replace ?"=
"A=B"=
"Abort operation"=
"Abort reading the memories?"=
"Abort the print in progress ?"=
"Abort the writing of memories ?"=
"Abort"=
"About IC7000BKT..."=
"Access to %1 was denied."=
"Action to be performed if the memory exists both in the database and in the RTX"=
"Activate the Split with the indicated values"=
"Activate the window to print the recording form"=
"Activate"=
"Activate/deactivate clipboard interception"=
"Activate/Deactivate the split"=
"Activates automatic mode based on the frequency from the clipboard"=
"Activates the frequency of the selected line"=
"Active Split"=
"Active this band"=
"Add a description of the split"=
"Add a description to the highlighted memory"=
"Add a description to the selected sked"=
"Address :"=
"AF"=
"AGC"=
"Alc"=
"ALC"=
"All Files (*.*)"=
"Allows cancellation of skeds by date and time"=
"Also cancel the memory in the RTX?"=
"An attempt was made to access %1 past its end."=
"An attempt was made to read from the writing %1."=
"An attempt was made to write to the reading %1."=
"An invalid argument was encountered."=
"An invalid file handle was associated with %1."=
"An unexpected error occurred while reading %1."=
"An unexpected error occurred while writing %1."=
"An unknown error has occurred."=
"An unknown error occurred while accessing %1."=
"an unnamed file"=
"An unsupported operation was attempted."=
"ANF"=
"Announce Frequency, S-Meter level and Receive Mode"=
"Annulla"=
"Anti VOX Level"=
"AntiVox"=
"Att"=
"ATTENTION !!!\nCancel all memories of the transceiver ?"=
"ATTENTION !!!\nProceeding the actual files and CONFIGURATION will be overwrited.\nContinue?"=
"ATTENTION !!!\nProceeding will cancel all 99 memories of the transceiver.\n\nCONTINUE ?"=
"ATTENTION !!!\nRestore the default settings of the program ?"=
"ATTENTION! To print the RTX memories settings it's necessary that the RTX is on and is in communication with the program. The print is performed in 2 phases:\nPhase 1: Reading of the memories from the RTX (in this phase the RTX cannot be used)\nPhase 2: Print of the settings.\n\nContinue?"=
"ATTENTION, during the reading of memories the RTX will transmit, double check that the antenne are connected!\n\nRead the memories from %d to %d using the PTT?"=
"ATTENTION: Delete the memory %1 ?"=
"ATTENTION: Overwrite memory %1 with the current settings ?"=
"ATTENTION: this is a beta version.\nThe beta version is a special version to test the program and could be it doesn't complete, unstable and not optimized.\n\nTo signal problems or other, please, to fill the form on\nhttp://iz2bkt.altervista.org/ic7000bktbeta.htm\ntanks.\n\nTHIS BETA WILL STOP TO WORK AFTER %d - %d.\n\n73 de IZ2BKT Mauro."=
"Audio compression is setting from external driver"=
"Audio format (click over to change)"=
"Audio format (click to change)"=
"Audio Format"=
"Audio output level"=
"Audio support disabled"=
"Audio support settings, click to change"=
"Audio"=
"Auto CQ"=
"Automatic setting of mode"=
"Autoupdate in seconds"=
"Autoupdate"=
"Background"=
"Backup archives and configuration performed."=
"Backup file not valid or damaged"=
"Backup the archives and configuration"=
"Backup"=
"Band %1mt"=
"Band :"=
"Band Limits :"=
"Band Limits"=
"Band Stacking :"=
"Band Stacking"=
"Band"=
"Bands 1"=
"Bands 2"=
"Bands 3"=
"Bands"=
"Bank A"=
"Bank B"=
"Bank C"=
"Bank D"=
"Bank E"=
"Bank"=
"BAUD :"=
"Begin/End scanning"=
"Bit :"=
"Bit of Stop :"=
"BW"=
"Bytes"=
"Call : %1"=
"Call setup function for the driver selected"=
"Cancel all RTX memories"=
"Cancel all skeds programmed from %s to %s?"=
"Cancel the activation of the sked <%s> ?"=
"Cancel the operation?"=
"Cancel the selected memory"=
"Cancel the selected split"=
"Cancel"=
"Change current language"=
"Change frequency speed in ms"=
"Change the audio parameters ?"=
"Change the band"=
"Character for the decimal ones"=
"Check for new version, need active internet connection."=
"Check for update"=
"Check"=
"CI-V Address :"=
"Click here and get the code for FREE"=
"Clipboard multiplication factor to obtain the correct frequency on TRX"=
"Clipboard"=
"Clone the current group of memories"=
"Close the window loosing the changes?"=
"Close this window"=
"Close"=
"Colors of Display"=
"COM"=
"Command failed."=
"Command for switch PTT OFF"=
"Command for switch PTT ON"=
"Command line for the program"=
"Command Line"=
"Communication error with the RTX.\nCheck the connection of cables\nthe interface and the RTX."=
"Communication with the Clipboard"=
"Comp"=
"Compression Level"=
"Config."=
"Configuration not valid."=
"Configuration not valid.\n\nSet now ?"=
"Configuration"=
"Configure band and mode limits"=
"Configure Plug-In"=
"Confirm the selected memory"=
"Continue"=
"Control integrity program error. Try to download the program from %1 and re-install."=
"Copy in StartUp"=
"Copy the selected PlugIn in StartUp group"=
"Could not start print job."=
"Create recur sked"=
"Create the new skeds ?"=
"Create the new skeds"=
"Creates a recurrence of skeds with the actual values"=
"CW"=
"Data of activation :"=
"Date and Time UTC"=
"Date not valid."=
"Date UTC of activation sked"=
"Day"=
"Days :"=
"Days interval not valid."=
"days up to"=
"Default = 70"=
"Default"=
"Delay in milliseconds before sending a bad command"=
"Delay"=
"Delete <%s> from startup program group ?"=
"Delete <%s> Plug-In ?"=
"Delete old skeds on program startup"=
"Delete old skeds on startup"=
"Delete programmed skeds from"=
"Delete programmed skeds to"=
"Delete skeds"=
"Delete Split"=
"Delete the current group of memories"=
"Delete the group <%s> ?"=
"Delete the selected memory"=
"Delete the selected memory?"=
"Delete the selected program from the startup group"=
"Delete the selected sked"=
"Delete the selected sked?"=
"Delete the selected Split?"=
"Delete"=
"Descr."=
"Description of Plug-In (visualized on the ToolTip of the PlugIn)"=
"Description of the program"=
"Description of the selected memory"=
"Description of the split"=
"Description that identifies the selected sked"=
"Description"=
"Destination disk drive is full."=
"discard changes?"=
"Disk full while accessing %1."=
"Dispatch exception: %1"=
"Divisor to calculate the values S1-S9+90"=
"Divisor"=
"Download now ?"=
"Driver Setup"=
"DSP filter shape"=
"DTCS codes"=
"DTCS"=
"Dtcs"=
"DTR :"=
"DTR ON/OFF"=
"DUP -"=
"DUP +"=
"DUP Value :"=
"E-Mail : %1"=
"email"=
"Enable audio support"=
"Enable the additional commands"=
"Enable/disable the audio recording"=
"Enable/disable the audio support"=
"Enable/Disable the auto-update"=
"Enable/Disable the log of SQL recording events"=
"Enable/disable the program memories window"=
"Enable/disable the radio memories wndow"=
"Enable/Disable the reading of the S-Meter and the Squelch"=
"End frequency :"=
"End frequency/memory of scan"=
"End memory :"=
"End scanning"=
"English"=
"Error %d from audio device"=
"Error %s, the PlugIn %s has not been saved"=
"Error %s\nThe changes won't be saved"=
"Error in external driver, the program will be closed."=
"Error in external driver.\n\nSet now ?"=
"Error in opening the log file"=
"Error in the initialization of the audio support."=
"Error performing backup : %1"=
"Error performing restore : %1"=
"Exit from the Log"=
"Exit from the program."=
"Exit the program"=
"Exit without saving"=
"Exit"=
"External Driver"=
"Failed to create empty document."=
"Failed to launch help."=
"Failed to open document."=
"Failed to save document."=
"FAST"=
"File :"=
"Fill the form and you receive by e-mail the key to use all the functions of the free version and to try for 30 days the functions of the full version."=
"Filter"=
"Filter:"=
"FilterW"=
"Find the Plug-In or program"=
"Find the program"=
"FM"=
"Folder < %1 > cannot be created."=
"Folder < %1 > does not exist, create ?"=
"Folder < %1 > doesn't contains any files of backup."=
"Folder < %1 > not valid."=
"Folder for audio files not valid"=
"Folder for audio files"=
"Folder to save the audio files"=
"Following memory"=
"For enable the new configuration, the program will automatically be close, please restart."=
"Freq./Mem."=
"Frequency Mode"=
"Frequency of duplex ( 0 for default )"=
"Frequency of duplex"=
"Frequency of the Manual Notch Filter 1"=
"Frequency of the Manual Notch Filter 2"=
"Frequency"=
"Friday"=
"from %1 Hz to %2 Hz"=
"From"=
"Full path of the Plug-In command line"=
"G Extensions if SQL off :"=
"General coverage of RTX"=
"General coverage of the transceiver from %1 Hz to %2 Hz"=
"Generate"=
"Group already exists <%s>."=
"Help"=
"Hexadecimal address to identify the RTX"=
"High limit Hz"=
"Hook Clipboard"=
"http://iz2bkt.altervista.org/IC7000bkt3en_download.html"=
"Hz"=
"I. S."=
"IC7000"=
"IC7000BKT - ATTENTION"=
"IC7000BKT - Audio setting"=
"IC7000BKT - AudioRecorder"=
"IC7000BKT - Band and mode limits"=
"IC7000BKT - Configuration"=
"IC7000BKT - Delete Skeds"=
"IC7000BKT - ERROR"=
"IC7000BKT - Error"=
"IC7000BKT - Generate recur sked"=
"IC7000BKT - Memories Synchronization"=
"IC7000BKT - Memory Bank"=
"IC7000BKT - Plug-In"=
"IC7000BKT - PTT Setup"=
"IC7000BKT - PTT"=
"IC7000BKT - ScanLog"=
"IC7000BKT - Select DTCS code"=
"IC7000BKT - Select Language"=
"IC7000BKT - Select Tone"=
"IC7000BKT - setting COM"=
"IC7000BKT - Startup"=
"IC7000BKT - Store current setting"=
"IC7000BKT has been registered succesfully."=
"IC7000BKT Icom 706 Control - Registration"=
"IC7000BKT"=
"IC7000MKII"=
"IC7000MKII/G"=
"IC718"=
"IF filter selection"=
"If memory exist on RTX and on database execute:"=
"Impossible to save the memories : %1"=
"Impossible to save the skeds : %1"=
"Impossible to save the split : %1"=
"Info"=
"Insert a description and press Update"=
"Insert a description, choose a memory and press Save"=
"Insert a description, control data and press Save"=
"Insert e-mail address"=
"Insert own call."=
"Insert own name."=
"Insert your call or your name in the appropriate field."=
"Inside PBT setting"=
"Insufficient memory to perform operation."=
"Internal application error."=
"Invalid filename."=
"It is necessary to specify the postal address of where to send the code for your chosen activation"=
"Its not possible to check updatings at this time."=
"Keep in front key PTT"=
"Keep recorder in front"=
"Keep the recorder in front"=
"Key for PTT :"=
"Key PTT keep in front"=
"KHz"=
"LEV."=
"Limit down ( S0 )"=
"Limit of higher frequency for CW mode in the selected band"=
"Limit of higher frequency for FM mode in the selected band"=
"Limit of higher frequency for LSB mode in the selected band"=
"Limit of higher frequency for RTTY mode in the selected band"=
"Limit of higher frequency for the selected band"=
"Limit of higher frequency for USB mode in the selected band"=
"Limit of higher frequency on the RTX"=
"Limit of lower frequency for CW mode in the selected band"=
"Limit of lower frequency for FM mode in the selected band"=
"Limit of lower frequency for LSB mode in the selected band"=
"Limit of lower frequency for RTTY mode in the selected band"=
"Limit of lower frequency for the selected band"=
"Limit of lower frequency for USB mode in the selected band"=
"Limit of lower frequency on the RTX"=
"Linked %s"=
"List memories"=
"List memorised skeds"=
"List of memorised splits"=
"List of the program in the startup group"=
"List of the Skeds :"=
"List radio memories"=
"List Skeds"=
"List Split"=
"List the Split :"=
"Local Time and Date"=
"Local"=
"Location and executable program"=
"Log :"=
"Log"=
"Loop pause"=
"Loop the phrase"=
"Loop"=
"Low limit Hz"=
"lower value equivalent to S0"=
"LSB"=
"m/s"=
"Mail system DLL is invalid."=
"Management of radio bands limits and modes"=
"Mem."=
"Memories"=
"Memorise the current settings in an RTX memory"=
"Memory :"=
"Memory bank :"=
"Memory bank description"=
"Memory bank"=
"Memory Mode"=
"Memory number to begin reading from (from 1 to 99)"=
"Memory"=
"Mic. Gain"=
"Microphone Gain Setting"=
"MID"=
"Mixed"=
"MNF1"=
"MNF2"=
"Mode CW   from %1 Hz to %2 Hz"=
"Mode FM   from %1 Hz to %2 Hz"=
"Mode LSB  from %1 Hz to %2 Hz"=
"Mode RTTY from %1 Hz to %2 Hz"=
"Mode to use for tuning"=
"Mode USB  from %1 Hz to %2 Hz"=
"Mode"=
"MODO1"=
"MODO10"=
"MODO2"=
"MODO3"=
"MODO4"=
"MODO5"=
"MODO6"=
"MODO7"=
"MODO8"=
"MODO9"=
"Monday"=
"Monitor Level"=
"Monitor"=
"Month"=
"More information on the activation."=
"ms"=
"Multiplication Factor  :"=
"Name : %1"=
"Name for the new group:"=
"Name of audio file (AUTO for automatic)"=
"Name of Plug-In (visualized on the key of the PlugIn)"=
"Name of the audio file to be used for the recordings (Auto for automatic choice)"=
"Name of the log file"=
"Name of the memory"=
"Name"=
"NB level setting"=
"NB width setting"=
"NB"=
"New group of memories"=
"New name for <%s> :"=
"New Split"=
"New version avaible : %s"=
"New"=
"No error message is available."=
"No error occurred."=
"Not all of the system registry entries (or INI file) were removed."=
"Not valid communication address"=
"Nothing"=
"Now disable this function : %s. \n\nThis function it's avaible only in full version.\n\nFor more information, use the menù Utility and choose <Register full version>."=
"Nr > Description"=
"NR level setting (Default=6)"=
"Nr"=
"NR"=
"Number of data bits"=
"Number of stop bits"=
"Number of the last memory to read (from 1 to 99)"=
"O.S."=
"OFF"=
"Offset to calculate the UTC time, AUTO: uses the system settings"=
"OK"=
"Ok"=
"ON/OFF Attenuator 20db"=
"ON/OFF Auto Notch Filter"=
"ON/OFF Break In"=
"ON/OFF DTCS codes"=
"ON/OFF Duplex ( TX down )"=
"ON/OFF Duplex ( TX up )"=
"ON/OFF Manual Notch Filter 1"=
"ON/OFF Manual Notch Filter 2"=
"ON/OFF Monitor your transmitted signals"=
"ON/OFF Noise Blanker"=
"ON/OFF Noise Reduction"=
"ON/OFF Preamplifier"=
"ON/OFF Speech Compressor"=
"ON/OFF Tone Squelch"=
"ON/OFF Tone"=
"ON/OFF Twin Peak Filter for RTTY mode"=
"ON/OFF Voice Squelch Control"=
"ON/OFF VOX"=
"Open"=
"Open/close the memory bank"=
"OTHER"=
"Out of memory."=
"Outside PBT setting"=
"Overwrite Database"=
"Overwrite RTX"=
"packet"=
"Page %d of %d"=
"Parity :"=
"Parity value of the serial port"=
"Partial transmission time"=
"Partial"=
"Passband width"=
"Pause 1"=
"Pause 2 = Pause in milliseconds if the SQL opens, Pause 1 = if -0 then pause while SQL open, if -1 then continue scan"=
"Pause 2"=
"Pause in milliseconds before resuming scan"=
"Pause in seconds between each recording sample"=
"Pause"=
"Phrase %d not present, please register"=
"Phrase 1"=
"Phrase 2"=
"Phrase 3"=
"Phrase 4"=
"pixels"=
"Play the phrase"=
"Play the recorded audio from the selected line"=
"Play"=
"Please enter a currency."=
"Please enter a date and/or time."=
"Please enter a date."=
"Please enter a GUID."=
"Please enter a number between %1 and %2."=
"Please enter a number."=
"Please enter a positive integer."=
"Please enter a time."=
"Please enter an integer between %1 and %2."=
"Please enter an integer between 0 and 255."=
"Please enter an integer."=
"Please enter no more than %1 characters."=
"Please register this program its free."=
"Please select a button."=
"Please, insert a valid registration code."=
"PlugIn <%s>  has correctly been inserted in the startup program"=
"Plug-In"=
"PlugIn/Program"=
"PO"=
"Pow."=
"Power Out"=
"Power to use for tuning"=
"Power"=
"Pre"=
"Previous memory"=
"Print the band limit settings?"=
"Print the list of programme memories?"=
"Print the list of the memories"=
"Print the list of transceiver memories?"=
"Print the Log"=
"Print the request activation form"=
"Print the Skeds ?"=
"Print the Split?"=
"Print"=
"Prints"=
"Proceed"=
"prog"=
"Program"=
"Protocol of communication: NONE=No handshaking, HARD=Hardware, SOFT=Software"=
"PTT -> Tune mode:%s Power:%d%%"=
"PTT disabled"=
"PTT Key : %s"=
"PTT OFF"=
"PTT ON"=
"PTT setting, click to change"=
"Put the RTX in Memory mode"=
"Radio Memories"=
"Radio Station : %1\nOperator : %2"=
"Read and download the RTX memories from %d to %d ?"=
"Read and download the RTX memories"=
"Read the memories from %d to %d and setting the DUP to %s ?"=
"Recall frequency and operating mode."=
"Recall"=
"Recall/Save First band stacking"=
"Recall/Save Second band stacking"=
"Recall/Save Third band stacking"=
"Record only if SQL OFF"=
"Record only if the squelch is open (only G Extensions)"=
"Record the phrase %d ?"=
"Record"=
"Records the phrase"=
"reg_en.html"=
"Register full version"=
"Remove the selected PlugIn or Program from list"=
"Rename the current group of memories"=
"Repeat this sked each"=
"Repeater Tone"=
"Replace <%s> PlugIn with the introduced data"=
"Request full version activation from the Web site"=
"Request full version code for %1."=
"Reset all fields to enter a new split"=
"Reset all fields to enter data for a new memory"=
"Reset partial transmission time ?"=
"Reset the fields to allow entry of data for a new sked"=
"Reset total trasmission time ?"=
"Reset trasmission time"=
"Reset"=
"Restore archives and configuration performed.\n\nFor enable the new archive and configuration, the program will automatically be close, please restart."=
"Restore default frequency for the Manual Notch Filter 1 and 2"=
"Restore default"=
"Restore the archives and CONFIGURATION"=
"Restore the default settings"=
"Restore the default value for NB"=
"Restore the saved settings"=
"Restore"=
"Resume Scan."=
"RTS :"=
"RTS ON/OFF"=
"RTTY"=
"Rx Dtcs"=
"Rx Filter"=
"Rx filter"=
"Rx Freq."=
"Rx Frequency out of limits : %dHz - %dHz"=
"Rx frequency"=
"Rx Mode"=
"Rx operating mode"=
"Rx Polarity"=
"Rx Tone"=
"Rx TSql"=
"RX"=
"s"=
"S"=
"Saturday"=
"Save and Active"=
"Save and close this windows"=
"Save As"=
"Save changes to %1?"=
"Save current memory in the RTX and active Memory Mode"=
"Save frequency and operating mode."=
"Save Split"=
"Save the activation data and continue with the program execution"=
"Save the actual settings"=
"Save the current settings in an RTX memory"=
"Save the current settings"=
"Save the current split"=
"Save the data in the startup group"=
"Save the memory with selected values"=
"Save the settings"=
"Save the sked with the current settings"=
"Save these settings?"=
"Save"=
"Saves the changes to the Plug-in selected"=
"Scan end out of limits : %dHz - %dHz"=
"Scan start out of limits : %dHz - %dHz"=
"Scan the radio memories"=
"Scan using the values stored in the RTX"=
"Scanner management"=
"Scanner Softw."=
"Scanner"=
"Scanning memories"=
"Scanning step"=
"Scanning"=
"Seconds"=
"Seek failed on %1"=
"Sel."=
"Select a type of activation"=
"Select AGC mode"=
"Select audio format"=
"Select background color of display"=
"Select language"=
"Select Memory Bank"=
"Select memory for memory scan"=
"Select Memory"=
"Select one or more printjobs"=
"Select operating mode"=
"Select text color of display"=
"Select the defult value for the selected filter"=
"Select the folder for the audio files"=
"Select the folder/file from which to recover the files"=
"Select the folder/file in which to save"=
"Select the Icom model"=
"Select the key for PTT"=
"Select the RTX"=
"Select VFO A"=
"Select VFO B"=
"Selected"=
"Selection of the group of memories"=
"Send an e-mail to iz2bkt@altervista.org"=
"Send in closed envelope to:"=
"Send Mail failed to send message."=
"Serial port COM:%1 not working.\n\nSet now ?"=
"Serial port error.\n\nExit the program ?"=
"Serial port settings, click to change"=
"Serial port to use"=
"Serial Port/Driver :"=
"Set both VFOs to the current settings"=
"Set primary VFO"=
"set the decimal character passed from the clipboard"=
"Set the RTX frequency"=
"Setting duplex value"=
"Setting S-Meter"=
"Setting the parameters of work"=
"Setting the program startup"=
"Setup"=
"Shape"=
"Short break too low"=
"SIG"=
"Signal"=
"Sked"=
"Skeds"=
"SLOW"=
"Specify how many seconds between the program and RTX syncronising"=
"Speech"=
"Speed of serial port"=
"Split value not set"=
"Split"=
"SQL"=
"Start frequency :"=
"Start frequency/memory of scan"=
"Start memory :"=
"Start reading the specified memories"=
"Start the selected prints"=
"Start the synchronization"=
"Start"=
"Start/Stop playback of the selected audio file"=
"Start/Stop the recording in a new audio file"=
"Startup"=
"Static"=
"Station callsign"=
"Step too low"=
"Step"=
"Stop the play"=
"Stop the recording"=
"Stop"=
"Store"=
"Sunday"=
"Switch in AM Mode and put TX ON"=
"Switch scan from memory <-> frequency"=
"Swr"=
"SWR"=
"Syncronise the program with the RTX"=
"Syncronize the memories database with the RTX"=
"Syncronize the RTX memories with those of the program?\n\nThe deleted RTX memories will also be deleted in the program, the name Mem<nn> where nn is the number of the memory will be assigned to the new RTX memories."=
"Syncronize"=
"Syncronizes the program with the RTX memories"=
"System registry entries have been removed and the INI file (if any) was deleted."=
"t"=
"Temporarily interrupts the reproduction/recording in progress"=
"Terminate"=
"Text"=
"The base group cannot be cancelled or modified"=
"The end scan must be higher than the start scan"=
"The execution of the program continues trying to reestablish the connection."=
"The file is not supported by a Document Object server."=
"The file is too large to open."=
"The frequency Rx and Tx are out of limits : %dHz - %dHz"=
"The new value is not valid"=
"The period of test is finished and will come disabled the functionalities of the full version.\n\nYou want to have information on the full version ?"=
"The serial port COM:%1 does not work."=
"This beta version has expired, please download new version on http://iz2bkt.altervista.org"=
"This function it's avaible only in full version.\n\nFor more information, use the menù Utility and choose <Register full version>."=
"This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s."=
"This program requires the file %s, which was not found on this system."=
"Thursday"=
"Time and Date UTC"=
"Time in second for the tune"=
"Time UTC"=
"Time"=
"Timeout"=
"To"=
"Tone Squelch"=
"Tone to the memory."=
"Tone"=
"Total transmission time"=
"Total"=
"TPF"=
"Transfer to VFO"=
"Transfers the memory to the VFO"=
"Transmit <-> Receive"=
"TSQL"=
"TSql"=
"Tuesday"=
"Tune software emulation"=
"Tune"=
"Tx Dtcs"=
"Tx Filter"=
"Tx filter"=
"Tx Freq."=
"Tx Frequency out of limits : %dHz - %dHz"=
"Tx frequency"=
"Tx Mode"=
"Tx Operating mode"=
"Tx Polarity"=
"Tx Time"=
"Tx Tone"=
"Tx TSql"=
"TX"=
"Unable to load mail system support."=
"Unable to read from %1, it is opened by someone else."=
"Unable to read write-only property."=
"Unable to write read-only property."=
"Unable to write to %1, it is read-only or opened by someone else."=
"Uncheck"=
"Unexpected file format."=
"Unknown Type"=
"Untitled"=
"Update the description of the selected memory"=
"Updating in milliseconds"=
"Usable memories from 1 to 99."=
"USB"=
"Use memory E99  for internal temporary use"=
"Use the memory E99\nfor temporary use"=
"Use the PTT to calculate the value of the DUP"=
"UTC Offset :"=
"UTC Time and Date"=
"UTC time of sked activation"=
"UTC"=
"Utility"=
"ValIfShift"=
"ValNBLev."=
"ValNBW."=
"ValNRLev."=
"ValOutShift"=
"Value of signal meter refresh in milliseconds"=
"Value of the first read memory is not valid.\n\nInsert a value from 1 to 99 and lower than the value of the last read memory"=
"Value of the last read memory not valid.\n\nInsert a value from 1 to 99."=
"VFO A"=
"VFO Active"=
"VFO B"=
"VFO Sel."=
"VFO-A : Hz"=
"VFO-B : Hz"=
"View Log"=
"View the SQL log events"=
"View user manual"=
"Visualize the bands of the 10mt - 6mt - 2mt and 70cm"=
"Visualize the bands of the 160mt - 80mt - 40mt and 30mt"=
"Visualize the bands of the 20mt - 17mt - 15mt and 12mt"=
"Volume Level for speech function"=
"VOX delay time"=
"VOX Level"=
"Vox"=
"VSC"=
"Wait for scanning resumption after the SQL closes"=
"web"=
"Wednesday"=
"WID."=
"Work in progress ..."=
"Writes the memories with a description starting Mem.<nn> to the RTX starting from <nn>?\n\nATTENTION: the RTX memories from <nn> will be overwritten."=
"Writes the memories with a description starting Mem.<nn> to the RTX."=
"Year"=
"You running last version"=